|
Testimonials |
Most of the testimonials below
employ only the initials of Conetrol users in identifying the authors.
This policy was set early on because permission to use full names
was not solicited or granted. However, if you are reading this and
recognize your comments or initials or address and would like to have your name
included with your testimonial, Conetrol would be not only pleased but
honored to replace your initials with your full name. Just email or
write us and the change will be quickly made. And please include
your city and zip code if this information is missing.
The testimonials are arranged in alphabetical order with the
initial of the last name determining position on the Testimonials webpage.
If your name is Frank Lawson, for instance, you would go down the list until you get into the L's, then
try to find FL. If there is more than one FL, see if you can
recognize your quotation which you may have sent us either by postmail or e-mail.
If there is the name of a city after FL and it is your city, that
may pretty well identify you as the author of the testimonial. Tell us it is OK
to use your full name and this will be done. On the other hand,
if you don't recognize the quotation and it turns out another FL in
your town sent the testimonial, let us know and the testimonial will continue
to be identified by initial rather than full name.
|
|
20311 EMAIL OR POSTMAIL RECEIVED FROM:
PA --- SCOTLAND
908299 ~ MAIL OR POSTMAIL RECEIVED FROM:
CA --- Bangkok, THAILAND EMAIL OR POSTMAIL RECEIVED FROM: PA (dealer) --- Dallas TX 75236
EMAIL OR POSTMAIL RECEIVED FROM: RCA --- Franklin MA 02038
EMAIL OR POSTMAIL RECEIVED FROM: SPA
(dealer) --- Dallas TX 75236 EMAIL OR POSTMAIL RECEIVED FROM: BB ---
Edmonton AB CANADA T6H 2Y8 EMAIL OR POSTMAIL RECEIVED FROM: CB ---
Mokena IL 60448 58510 ~ EMAIL OR POSTMAIL RECEIVED FROM:
CB -- Johannesburg, SOUTH AFRICA EMAIL OR POSTMAIL RECEIVED FROM: DB ---
Rockford MI 49341 EMAIL OR POSTMAIL RECEIVED FROM: DB ---
South Colby WA 98384 998599 ~ EMAIL OR POSTMAIL RECEIVED FROM:
DB --- Tarawera Rotorua NEW ZEALAND 60510 ~ EMAIL OR POSTMAIL RECEIVED FROM:
Glen F. Barnett -- Westgate NSW 2048, AUSTRALIA 38610 ~ EMAIL OR POSTMAIL RECEIVED FROM:
Glen Barnett -- Sydney, AUSTRALIA EMAIL OR POSTMAIL RECEIVED FROM: JBB ---
Stellarton, Novia Scotia, CANADA B0K 1S0 EMAIL OR POSTMAIL RECEIVED FROM: JDB
(gunsmith) --- Ashdown AR 71822 EMAIL OR POSTMAIL RECEIVED FROM: KB ---
Saratoga WY 82331 EMAIL OR POSTMAIL RECEIVED FROM: LB ---
Los Banos CA 93635 EMAIL OR POSTMAIL RECEIVED FROM: MB ---
Greenbay WI 54303 EMAIL OR POSTMAIL RECEIVED FROM: RB ---
Wasilla AK 99654 EMAIL OR POSTMAIL RECEIVED FROM:
RB --- Plant City FL 33563 10901 ~
EMAIL OR POSTMAIL RECEIVED FROM: RB --- Covington TN 38019 18201 ~ EMAIL OR POSTMAIL RECEIVED
FROM: RB --- Odessa TX 79762 40899 ~ EMAIL OR POSTMAIL RECEIVED FROM:
RJB --- McKinleyville CA 95519 10190 ~ EMAIL OR POSTMAIL RECEIVED FROM:
SB --- Eden Prairie MN 55347 EMAIL OR POSTMAIL RECEIVED FROM: TB ---
Dolan Springs AZ 86441 40399 ~ EMAIL OR POSTMAIL RECEIVED FROM:
Fred Capobianco -- Port Washington NY 11050 980490 ~ LETTER IN SAYSYOU COLUMN OF DECEMBER 2010 AMERICAN HUNTER, WRITTEN BY:
Douglas Cummings --- Heyworth IL 61745 EMAIL OR POSTMAIL RECEIVED FROM: EC --- Honolulu HI 96822
88910 ~ EMAIL OR POSTMAIL RECEIVED FROM:
GC --- Inman SC 29349 EMAIL OR POSTMAIL RECEIVED FROM: HCC ---
Bessemer AL 35023 EMAIL OR POSTMAIL RECEIVED FROM: JC --- Hanover PA 17331
80699 ~ EMAIL OR POSTMAIL RECEIVED FROM:
KC -- Ruckersville VA 22968 EMAIL OR POSTMAIL RECEIVED FROM: MC ---
Shoreview MN 55126 EMAIL OR POSTMAIL RECEIVED FROM: PC ---
Cottage Grove OR 97424 EMAIL OR POSTMAIL RECEIVED FROM: RC --- Pineville LA 71360 EMAIL OR POSTMAIL RECEIVED FROM: SC
(dealer name) 40801 ~ EMAIL OR POSTMAIL RECEIVED
FROM: SC --- NEW ZEALAND EMAIL OR POSTMAIL RECEIVED FROM: AD ---
Slaton TX 79364 EMAIL OR POSTMAIL RECEIVED FROM: BD ---
Mt. Airy GA 30563 909899 ~ EMAIL OR POSTMAIL RECEIVED FROM:
ED --- Phoenix AZ 85040 99790 ~ EMAIL OR POSTMAIL RECEIVED
FROM: MD --- Montgomery TX 77356 EMAIL OR POSTMAIL RECEIVED FROM: RD ---
48837 EMAIL OR POSTMAIL RECEIVED FROM: RD ---
Scranton PA 18505-2936 EMAIL OR POSTMAIL RECEIVED FROM: SD ---
Fairfield Glade TN 58558 EMAIL OR POSTMAIL RECEIVED FROM: ACE ---
Van Alstyne TX 75495 EMAIL OR POSTMAIL RECEIVED FROM: BE EMAIL OR POSTMAIL RECEIVED FROM: GWE ---
Fort McMurray AB CANADA T9K 2A5 EMAIL OR POSTMAIL RECEIVED FROM: MDE ---
Fairfax Station VA 22039 EMAIL OR POSTMAIL RECEIVED FROM: BF ---
Monroeton PA 18832 EMAIL OR POSTMAIL RECEIVED FROM: BF ---
64119 EMAIL OR POSTMAIL RECEIVED FROM: DF ---
Franklin PA 16323 EMAIL OR POSTMAIL RECEIVED FROM: EF ---
Marlton NJ 08053 EMAIL OR POSTMAIL RECEIVED FROM: FF ---
Hammond IN 46327 EMAIL OR POSTMAIL RECEIVED FROM: RF ---
Mountlake Terrace WA 98043 EMAIL OR POSTMAIL RECEIVED FROM: RBF ---
Smithfield PA 15478-8918 EMAIL OR POSTMAIL RECEIVED FROM: SWF
(dealer) --- Concord NC 28025 EMAIL OR POSTMAIL RECEIVED FROM: TF EMAIL OR POSTMAIL RECEIVED FROM: TLF ---
Hawaiian Gardens CA 90716-1802 EMAIL OR POSTMAIL RECEIVED FROM: WF ---
Wilsall MT 59086 EMAIL OR POSTMAIL RECEIVED FROM: WLF ---
Urbana OH 43078 EMAIL OR POSTMAIL RECEIVED FROM: ZF
(Rev.) --- Holly Hill SC 29059 10699 ~ EMAIL OR POSTMAIL RECEIVED FROM:
CG --- Victoria, AUSTRALIA EMAIL OR POSTMAIL RECEIVED FROM: DG ---
Wells MN 576097-1521 EMAIL OR POSTMAIL RECEIVED FROM: GFG ---
Garner NC 27529 EMAIL OR POSTMAIL RECEIVED FROM: JG EMAIL OR POSTMAIL RECEIVED FROM: JG ---
Las Vegas NV 89109 EMAIL OR POSTMAIL RECEIVED FROM: MG
(dealer) --- Raleigh NC 27607 90199 ~ EMAIL OR POSTMAIL RECEIVED FROM:
PG --- Townsend DE 19734 50901 ~ EMAIL OR POSTMAIL RECEIVED
FROM: A. Murat Gunsiray -- Istanbul, TURKEY EMAIL OR POSTMAIL RECEIVED FROM: ARH ---
South Island, NEW ZEALAND 80290 ~ EMAIL OR POSTMAIL RECEIVED FROM:
DH --- Marlborough, NEW ZEALAND 989011 ~ EMAIL OR POSTMAIL RECEIVED FROM:
Michael Hall --- Clarkston WA 99403 68501 ~ EMAIL OR POSTMAIL RECEIVED
FROM: Eric Hilsenberg EMAIL OR POSTMAIL RECEIVED FROM: David
J. Hohnen --- Witchcliffe. WESTERN AUSTRALIA 6286 EMAIL OR POSTMAIL RECEIVED FROM: GH EMAIL OR POSTMAIL RECEIVED FROM: GRH ---
Corona CA 92883 EMAIL OR POSTMAIL RECEIVED FROM: Joseph Holt
--- Verona PA 15147 EMAIL OR POSTMAIL RECEIVED FROM: JH
(dealer) --- Scotts Valley CA 95066 EMAIL OR POSTMAIL RECEIVED FROM: JHH ---
Avon IL 61415 EMAIL OR POSTMAIL RECEIVED FROM: NH ---
Enid OK 73701 68899 ~ EMAIL OR POSTMAIL RECEIVED FROM:
RH -- Magnolia TX 77355 28390 ~ EMAIL OR POSTMAIL RECEIVED FROM:
RH --- Mudgeeraba 4213, Queensland AUSTRALIA EMAIL OR POSTMAIL RECEIVED FROM: RGH ---
Edina MN 55424 980701 ~ EMAIL OR POSTMAIL RECEIVED
FROM: SH --- Goliad TX 77963 EMAIL OR POSTMAIL RECEIVED FROM: SH ---
Taylor WI 54659 EMAIL OR POSTMAIL RECEIVED FROM: SH ---
Watertown WI 53094 EMAIL OR POSTMAIL RECEIVED FROM: TH ---
Hibbing MN 55746 EMAIL OR POSTMAIL RECEIVED FROM: FJI ---
King City CA 93930 909099 ~ EMAIL OR POSTMAIL RECEIVED FROM:
GJ --- Sorrento FL 32776 18699 ~ EMAIL OR POSTMAIL RECEIVED FROM:
JJ EMAIL OR POSTMAIL RECEIVED FROM: KJ ---
CANADA EMAIL OR POSTMAIL RECEIVED FROM: RJ ---
Franksville WI 53126 909410^990610 ~ EMAIL OR POSTMAIL RECEIVED FROM:
Tom Jacobs --- Grand Rapids MI 49546 EMAIL OR POSTMAIL RECEIVED FROM: EK ---
Nacogdoches TX 75961 EMAIL OR POSTMAIL RECEIVED FROM: JK ---
St. Joseph MI 49085 EMAIL OR POSTMAIL RECEIVED FROM: JK ---
St. Joseph MI 49085 EMAIL OR POSTMAIL RECEIVED FROM: RK EMAIL OR POSTMAIL RECEIVED FROM: RWK ---
Austin TX 78704 EMAIL OR POSTMAIL RECEIVED FROM: SK ---
Pearl City HI 96782 EMAIL OR POSTMAIL RECEIVED FROM: WK ---
Plainfield IL 60544 EMAIL OR POSTMAIL RECEIVED FROM: BL ---
Flemington NJ 08822 88899 ~ EMAIL OR POSTMAIL RECEIVED FROM:
BL --- Ellicott City MD 21042 EMAIL OR POSTMAIL RECEIVED FROM: CL ---
Petersburg AK 99833 80798 ~ EMAIL OR POSTMAIL RECEIVED FROM:
CL --- Victoria TX 77905-2542 EMAIL OR POSTMAIL RECEIVED FROM: DL ---
Nevada City CA 95959 EMAIL OR POSTMAIL RECEIVED FROM: DL ---
Winepeg, CANADA EMAIL OR POSTMAIL RECEIVED FROM: JL ---
FRANCE EMAIL OR POSTMAIL RECEIVED FROM: RL ---
Loveland CO 80537 98590 ~ EMAIL OR POSTMAIL RECEIVED FROM:
RWL --- Redcliff, AB CANADA T0J 2P2 EMAIL OR POSTMAIL RECEIVED FROM: TL ---
Wappingers Falls NY 12590 EMAIL OR POSTMAIL RECEIVED FROM: BM ---
Ft. Morgan CO 80701 60190 ~ EMAIL OR POSTMAIL RECEIVED FROM:
CFM (NRA life mbr.) -- Corsica PA 15829 EMAIL OR POSTMAIL RECEIVED FROM: DDM ---
Irving TX 75061 909990 ~ EMAIL OR POSTMAIL RECEIVED FROM:
JM --- Mt. Olive IL 62069 EMAIL OR POSTMAIL RECEIVED FROM: JMM ---
Chino Hills CA 91709 EMAIL OR POSTMAIL RECEIVED FROM: MCM ---
Rienzi MS 38865 EMAIL OR POSTMAIL RECEIVED FROM: RAM ---
LaPine OR 97739 EMAIL OR POSTMAIL RECEIVED FROM: SM ---
San Diego CA 92123 EMAIL OR POSTMAIL RECEIVED FROM: Tony
Messner --- Conifer CO 80433 EMAIL OR POSTMAIL RECEIVED FROM: TM ---
Covington GA 30209 EMAIL OR POSTMAIL RECEIVED FROM: WM ---
New Market VA 22844 68201 ~ EMAIL OR POSTMAIL RECEIVED
FROM: Ed Noffke --- PA 17225 & SOUTH AFRICA EMAIL OR POSTMAIL RECEIVED FROM: JN ---
Ukiah CA 95482 68501 ~ EMAIL OR POSTMAIL RECEIVED
FROM: WN --- Colorado Springs CO 80906 (U.S.
warrior) EMAIL OR POSTMAIL RECEIVED FROM: TN
(dealer) --- Warterlooville Hampshire ENGLAND P08 8QJ EMAIL OR POSTMAIL RECEIVED FROM: BO ---
AUSTRALIA 97990 ~ EMAIL OR POSTMAIL RECEIVED
FROM: JO --- Heron MT 59844 78290 ~ EMAIL OR POSTMAIL RECEIVED FROM:
RO 58299 ~ EMAIL OR POSTMAIL RECEIVED FROM:
CP --- Maclay Towers, AUSTRALIA 4169 90102 ~ EMAIL OR POSTMAIL RECEIVED
FROM: JP --- ENGLAND EMAIL OR POSTMAIL RECEIVED FROM: LCP ---
Morrisville PA 19067-4805 EMAIL OR POSTMAIL RECEIVED FROM: PP ---
Newark DE 19711 EMAIL OR POSTMAIL RECEIVED FROM: UJP ---
Nelson BC CANADA V1L 5P5 EMAIL OR POSTMAIL RECEIVED FROM: ARR ---
Greeley CO 80631 980301
~ EMAIL OR POSTMAIL RECEIVED FROM: BR --- Madison WI EMAIL OR POSTMAIL RECEIVED FROM: BLR ---
Wallace ID 83873 EMAIL OR POSTMAIL RECEIVED FROM: JR ---
Yorba Linda CA 92686- EMAIL OR POSTMAIL RECEIVED FROM: JWR ---
Martin TN 38237 401 ~ POSTMAIL RECEIVED FROM: Jerry
Roth --- Montrose CO 81401 EMAIL OR POSTMAIL RECEIVED FROM: PR ---
Boise ID 83707 EMAIL OR POSTMAIL RECEIVED FROM: Robert's
Gun Repair --- Buffalo NY 14211 EMAIL OR POSTMAIL RECEIVED FROM: R.
Rudine --- Durango CO 81301 60811 ~ EMAIL OR POSTMAIL RECEIVED FROM:
SR --- Green River WY 82935 EMAIL OR POSTMAIL RECEIVED FROM: CLS ---
Seagoville TX 75159 998011 ~ VEMAIL OR POSTMAIL RECEIVED FROM:
DS --- Azusa CA 91702-2616 79490 ~ EMAIL OR POSTMAIL RECEIVED FROM:
ES, NRA Endowment Member EMAIL OR POSTMAIL RECEIVED FROM: EVS ---
Memphis TN 38128 908290 ~ EMAIL OR POSTMAIL RECEIVED FROM:
Jerry Schleiger --- Hartsville SC 29550 EMAIL OR POSTMAIL RECEIVED FROM: JPS ---
Florissant MO 63031 EMAIL OR POSTMAIL RECEIVED FROM: KS ---
GERMANY 908399 ~ EMAIL OR POSTMAIL RECEIVED FROM:
KS --- Chirstchurch 8042, NEW ZEALAND EMAIL OR POSTMAIL RECEIVED FROM: MS --- Idaho
Falls ID 83406 EMAIL OR POSTMAIL RECEIVED FROM: MS ---
Lewisberry PA 17339 EMAIL OR POSTMAIL RECEIVED FROM: Norman
H. Schiffman --- Murray UT 84107 EMAIL OR POSTMAIL RECEIVED FROM: RS ---
Clinton SC 29325 EMAIL OR POSTMAIL RECEIVED FROM: RJS ---
Gretna LA 70053 99190 ~ EMAIL OR POSTMAIL RECEIVED
FROM: SS --- WESTERN AUSTRALIA
Thank you for the newest brochure. I have had Conetrol rings and bases on my Kimber and am very pleased with them. I would now like to fit them to my Ruger No.1. This has been rebarreled to 300 H&H and the gunsmith machined the 1/4 rib to fit exactly the barrel contour so I wish to keep that.
I would therefore like the Custum two-pc RUGDTC2 (DapTar) base and 1" Custum rings.
I have done as you said and with the scope mounted (using the Ruger quarter rib) a drill bit of 29/64th will not quite go but a 7/16 will (between the bottom of the scope tube and the quarter rib). So please ... supply the appropriate mount.
I am travelling up to Scotland tomorrow morning and will not be able to telephone (if needed until mid week). I pick up emails at anytime.
I’ll say your AQD (Quick Detach webpage on Conetrol website) scope mounting is very solid and reliable. I did some small gunsmith work with the AQD base bottoms using fine metal sandpaper over the Vanguard receiver to perfectly horizontal-align the top surface of the front and rear mounting bases and made it slightly sloping toward bore firing line which save zero-in scope vertical adjusting clicks and leave more vertical clicks for real shooting adjustments.
After I properly adjusted both the front and rear windage adjustment screws, I can see almost perfect scope alignment with bore firing line as can be seen with a scope cross-hair and a laser bore sighter. The scope cross-hair and a laser dot always waltz along the firing line when I pointed to a white target at 100m, 200m and 300m at night. I believe I could not easily achieve this with other inflexible scope mounting suite.
We sure do appreciate you people and your fine quality
products. I have known (about your products) for years but only recently had
the good fortune to use some and now I want and will recommend nothing else but
yours. We thank you.
[ed.note: Received with request for catalog and for suggestions for
proper mount]: .... I plan on mounting a Leupold Compact 3x-9x scope in matte
finish on a right-hand Remington short action (257 Roberts) Model 700 Mountain
Rifle. I would prefer that the scope be mounted as low as possible.
Thank you for your attention to this matter. Your mounts have
been on my other rifles and have NEVER changed sight after much use.
I have been using your rings and bases for years and have
found them to be of the highest qality and appearance available today.
I wish to request some type of catalog and/or price list as
my stock is just about depleted.
Keep up the fine quality of your product and I am sure that
you will be noted as the finest mounts in the world.
I need another set of your wonderful scope mounts. I
currently have 5 sets on my other rifles. I need to have a set of Custum
2-piece bases and low Custum rings (for a Weatherby 7mm with a Redfield 2x7
compact).
The mounts perform flawlessly on my 300 Win and 7mm Rem Mags.
Over 500 rounds through each without any movement in the scope.
Have seen and handled some of your products and I am very, very impressed with the quality and finish. Top class !!!
I have forwarded an e-mail enquiring about possible acquisition of some bases and rings, especially the AQD's.
I presently have a set of your mounts on a Browning A-Bolt
Micro Medallion .243 and without equal they are THE FINEST EXAMPLE OF A QUALITY
PRODUCT available to a person looking for the best.
This is like that potato chip ad: "Betcha you can't eat
12:13 AM 4/7/2010just one." Betcha can't own just one Conetrol scope mount. Now even my
nice (another manufacturer named) rings bother me. So I'm replacing my mounts.
May I please have (a Custum set for the Browning A-Bolt).
Thanks heaps for the info you gave me regarding mounts and rings for my old Mannlicher. I have contacted all the people you thought may have info and am awaiting their reply.
By the way, I am most certainly a fan of your company's rings and mounts. Have them on 3 of my rifles already, including a more modern Manlicher. I have found them to be extemely robust and of the highest quality; sure is the closest thing i've come across to welding the mounts and rings on (a gun)!
Again, I thank you for your very detailed response. If you're ever in New Zealand and want a hunt then please do get back to me. There's plenty of every type of deer here and we have open seasons and no license required.
Firstly, THANK YOU for a truly great product -- the AQD (Adjust-Quik-Detach)
base/split-ring system on my Weatherby MKV works as promised and I am very happy!
[ed.note: Click the Quick Detach webpage on the www.conetrol.com
website for a detailed description of the AQD system].
I did have to remove/attach the scope with rings 3 or 4 times - firing the rifle
each time - to get it to 'settle in' & once the correct windage was established, the AQD (adjust)
screws (left side) were secured with 'Locktite 262 thread locker'.
The result is that (removal and reattachment) of scope to rifle does not alter
the impact point up to 100 metres. (I have only tested it out to this range).
I now want Conetrol bases and rings for my other hunting rifle (Anschutz Mod.
1431, calibr .22 Hornet ). See description below and please review the 5 pics attached for
visual reference.
[ed.note: This is a second letter from Mr. Barnett, speaking of Custum base and Quik-Zero Rings purchased for his Anschutz]: I just wanted to thank you for the Quik-Zero rings and Custum two-piece mounts you provided for my Anschutz .22 Hornet. They have fully resolved the 'wandering zero' issues I have had with this rifle since day one.
I was particularly impressed with the quality, fit and finish of the Custum bases -- very well engineered!
Bench rest results over four successive outings to my local 50 metre indoor range are impressive, with one-hole, three-shot groups being quite common and five-shot groups being within 1/4th inch, despite the use of different production runs of the same ammo --- I always suspected that this rifle could shoot that accurately!
I must admit that it took a few range outings to get the Quik-Zero rings to settle fully into the Custum bases, but am happy to report that all is well and there is now no change in impact point with removal and re-fit of my rifle scope.
I know from experience that this will translate nicely in the field --- Varmints beware!!
Cheers!
I find your scope mounts to be the finest on the market and I
appreciate your cooperation in the past.
Got my new Conetrol bases and rings and installed them on a
spanking new Winchester Mod.70 Featherweight in 7mm-08 caliber.
The rings made an already handsome rifle at least 100% more
attractive. (This is for me!)
I would like to order (Custum bases and rings) for a 700
Remington and Nikon 3-9 riflescope. I have really enoyed the mounts I ordered
for my Alpha rifle. They are beautifully made.
During the past fifteen I have used Conetrol rings and bases
on my rifles. I am pleased to say that in all those years I have experienced
nothing but satisfaction with your product.
Currently I purchased a new Weatherby Mark V deer rifle and I
would like to mount a Leupold scope using Conetrol rings and base. Please send
me a catalog so I can order the appropriate set of mounts.
(The order just placed) will complete my 5th set of Conetrol
mounts. Although I still have rifles with other mounts, I'm converting them as
I can.
You have a superb product! Keep up the good work.
Your products are (in my mind) the best on the market. I have
them on one rifle and would like to find out if they are available on
another.....
Spoke to you today about my recent purchase of a used BAR 2 Safari 338 Mag. As I am a millwright I truly appreciate the design of the original Conetrol mounts which match the
high luster blue of the gun perfectly, and the smooth design low profile is great looking. I am going to convert all my rifles over to your mounts and rings.
Wish I had run across these sooner. (On) the above metioned gun the front mount could go forward 3/4 of a inch. It has a Leupold 3.5 -10 Var-3 on it and the front tube has around 1 inch of tube left before the bell starts to open up.... Also, I want to get my scopes as close as possible (to the barrel).
I would like to request a catalog and any installation tips brochures you might have. Thanks.
I just wanted you to know I have installed my bases and
rings and everything is good.
Thanks for a great product.
I would like to order a two-piece Custum base for a Mod. 70
Winchester and a set of Gunnur rings to fit a Leupold 3-9x40 scope. (Money
order enclosed.)
This 70 has been waiting for its new owner to reach 12 so he
can go with the big boys this year, and I want to provide the lad with a
quality piece of equipment to start out with, made by folks who give a damn.
I plan to swap out all my others to Conetrol mounts and you
can expect a second order in a few weeks.
Thank you for such a great mounting system.
Extra nice products. I have been using your rings and bases for
at least 25 years and my father used before that.
I need an updated brochure on your scope mounts. Yours are
the only ones I use on my rifles. So far I've used 6 sets. I've at least 4 more
rifles to go.
Friends,
If anyone has any doubts about the strength of your product they should know that I have had no problems of any kind with them on my .460 Weatherby Magnum. This rifle is actually used for serious "plinking" and as such it is fired quite a bit.
Since my targets are large things that are selected to "react" to this powerful cartridge, full-power loads are always used. The Conetrol mounts have taken this extreme punishment in stride.
They are a beautiful and rugged product indeed.
Conetrol Scope Mounts
My gunsmith and I had never heard of them 35 years ago. I bought a Model 70 Winchester in .375 H&H Magnum at a gun show, and asked my gunsmith to find me some mounts and a Leupold 2x-7x scope for it. He said the only thing he could find was a Conetrol unit, which was kind of expensive.
We had the hardest time getting them mounted; we had to read the instructions a couple times. But ever since I've never had to tighten or mess with any of the screws.
This rifle has been on 12 outfitted hunts. It's been in big and little planes, in pickups, and on horses and ATVs, and I've shot over 700 rounds through it. I can honestly say it's the best $40 I ever spent on something I'd never neard of before.
A friend of mine recently purchased his first rifle, a .270
Weatherby Vanguard complete with (manufacturer named) scope and rings. A very
nice piece of equipment, to be sure. However, when I showed him my rifles which
are all outfitted with those beautiful Conetrol mounts and rings, well, he said
... "I gotta have 'em!"
So I'm requesting your latest catalouge and price list on
your rings and bases. Your products are so great they sell themselves! Many
thanks.
Do you make 3/8'' dovetail mounts for .22 rifles? [ed.note: The answer to the question is yes. See DapTar Bases webpage.]
I have other rifles with your mounts on them and found them to be the best on the market.
Just bought a Henery rifle .22 and would like to put your made-in-USA mounts
on an American rifle.
I have been using your product on my 30-06 for around 15
years and THEY ARE GREAT. I saw your latest ad in Guns magazine.
It's just over 2 weeks till deer season here in Pennsylvania.
This will be the first year that I hunt with my new Kimber Super America
"Rifle for Life."
It wears a Leupold Vari-X 2.5-8 mounted in Conetrol Custum
rings. From caliber (.260 Rem.) to scope mounts I have thoroughly researched
this rifle & have just what I want.
For the scope mount system, I believe that I could not have
chosen better -- strength, looks, weight -- Conetrol has it all.
George, thanks so much for hooking me up with the Conetrol (DapTar) mounts for my U9 Herter hunting rifle. These mounts are beautiful, and are of serious quality, worth every nickel!!! Also, your customer service was top notch.
These will not be the last mounts that I purchase from Conetrol. Thanks again.
Enclosed is a money order (for purchase of a Conetrol Custum
base and medium Custum rings) for a ... Belgium Browning BAR autoloader 30-06 Grade
II. .....
P.S. I recommend your fine product to all my friends. I use
your bases & rings on almost all of my rifles. Thank you!
For many years I told myself I would someday have the rifle
of my dreams. Soon, I hope, I'll realize that dream. One of the things required
for "my rifle" is the use of your base and rings.
Could you please sent me a catalog of the best scope rings
available today. Please send a list of dealers in my area along with the
catalog. (I live 20 miles south of Eugene OR.)
Thanks for the excellent service and a superb product.
These Conetrol rings and bases are the greatest looking
outfit on the market.
The gun owners and sportsmen owe you a debt of gratitude for
such an ingenious and great looking product.
I have had your rings and bases on (my Browning A-Bolt) for
16yrs, and the scope has never moved, and to be fair there has been some rough
handling over the years.
I think your product is awesome!!!
Please send me your free (brochure). I've used your rings and
bases on nearly all my rifles, because they are simply the best there is.
.... I need bases and rings to fit a Burris 6x18 scope to a
Model 788 Rem in 22-250. I am sure you probably make them, but my brochures are
all several years old.
I must tell you that I believe you have the most desirable
mounts available. The machining and finish surpass what you would normally find
on gun mounts and they are certainly the most aesthetically pleasing.
Your one piece base is particularly desirable and has a
feature built in that I was not aware of, and that is the section of steel that
butts up against the back of the front part of the receiver that keeps the base
from being able to move forward under recoil.
I cannot imagine a stronger base, and I've never seen rings
that have the same gripping ability as these vertically split rings.
Every future rifle of mine is going to wear Conetrol mounts
and I thank you for a superior product.
Good morning. I am writing to let you know I received my Custum rings and bases in the mail yesterday, and my boys and I installed them and mounted the scope on my new-to-me Browning BLR last evening.
I am also writing to congratulate you on, and thank you for, the finest set of rings and bases I have ever seen! I wanted a polished finish to match that of the receiver and scope, and I certainly got my wish. These rings fit together perfectly, and the fit and finish on all parts is absolutely amazing to me! I am extremely pleased, and just wanted to write to say thanks.
My young boys and I hope to make it out this afternoon to sight the rifle in and have a fun afternoon together.
I think your rings and mounts are awesome.
Thank you! I appreciate you getting the mounting screws out
so very quickly!!!
You have a GREAT product.
Your mounts are the finest I have ever owned.
I installed them the day I got them, went to the range the
next day, and admired them ever since. My rifle now has a perfect link.
Thank you for making a fine product.
As always, Conetrol is the Best and Worth the Extra!
I appreciate your continued devotion to the NRA.
I also appreciate the opportunity to still buy Conetrol
mounts/rings, which I have done starting about 20 years ago.
I don't buy many rifles but every one, since discovering
Conetrol, has been outfitted with your mounts/rings.
I have had your rings and mount on a .300 Weatherby magnum
rifle since 1989. They add beauty to the rifle and are praised by everyone that
sees them. They are also rock solid as I hunted in Alaska for four years with
no problem what so ever. Thanks for a great product!
Your product has been described and used in the Intermountain
Arms of Idaho article describing their "light rifle.
I've used your product for many years with complete success.
My daughter uses the system on her Hunter .22 Anschutz 1422
and classified as high women in the 1991 NRA silhouette shoot at Whittington.
Thank you for adding the touch of 'quality' with class.
I need a set of Conetrol bases and rings to mount a Leupold
Vari-X III 2.5-8 scope on my Steyr Mannlicher Model M Luxus. .....
I have been delighted with 2 other sets of your bases and
rings and they never fail to draw favorable commets. In fact, John Teevens
(Colorado Springs) and Bob Newman (Evergreen CO) both followed my lead, as I
suspect have many others. I'm sure you realize that there is no better
promotion than a delighted customer.
I also appreciate your giving The NRA Percent. I am a life
member and believe the NRA may be our only hope of keeping our sport.
For years I have been using your brilliant and excellent
quality scope mounts.
Your mounts are the finest on the market.
I would deeply appreciate it if you would send me your
(latest) catalog. Thank you very much.
I got your stainless bases and rings. They look great and
function flawlessly.
I have never seen mounts & rings this good anywhere, bar
none. My compliments to you.
Your scope mounts and rings are the greatest I've ever used.
I've had them on two rifles, traveled extensively to western
states, and shot hundreds of rounds without even a single move.
Please send me your brochure. I want a couple more sets.
Comments: It was a pleasure to talk with George on the phone
last Friday. I ordered mounts 21 years ago for my BAR. Talked to George then
also. It's special when the owner calls you direct.
Thank you for the service.
Thank you for the credit.
Thank you for a product that fits perfectly and looks good
and is the best in the field.
..... I use your rings & bases on all my guns as I think
they are the best.
Since 1976 I have used your rings & bases with complete
success & satisfaction.
Thanks again for an outstanding product!
All of our clients have been very satisfied with your
products.
I recommend the use of your system on every rifle we sell.
Please keep up the good work.
.....was wondering if you make rings and bases for (the
Weatherby Mark 22), and if so a price. Would like the high grade. I have the
high grade for my Sauer 202 and love them. Keep up the good work.
What a pleasant surprise to find you sent the screws I
requested and asked for payment rather than the other way around.
Thank you also for enclosing the information on other items
available and on aligning the scope when I remount it.
Excellent customer service!
[ed.note: The excerpts following are from a letter mailed to probably
the most famous classic gun making firm in our country, a copy of which writer
WF kindly sent to Conetrol. We are not familiar with the writer, but understand
from his letterhead that his life has been devoted to Hunter Education.]
... I have just finished thumbing through your brochure
(received from a fine classic rifle maker) and the photos reflect one easily
corrected component and for the life of me, I can't figure why you would not
have pictured your "world class rifle" with truly the world class
mount?
Now, I know you must know of them ... Conetrol out of Seguin,
Texas. I've used them for years without incident and there is no finer scope
mount on the market in design, aesthetically or functionally.
..... The mounts are perfectly machined perfectly finished
and present such an uncluttered streamline look. A world class finish.
No sir, I am not a company rep nor do I hold stock (in
Conetrol). I simply fancy fine firearms. Yours are such and they deserve
Conetrol mounts.
Just a note to say "Thanks" for an outstanding
product.
I watched my Steyr S/T .375 H&H take a tremendus
pounding in the gun racks of a Land Cruiser on my recent hunt to Zimbabwe's
Matetsi area. I was sure there was no way it could hold its zero -- but it did!
My hunting partner's Steyr was also Conetrol equipped.
Performance like Conetrol's shouldn't go unrewarded -- Thanks
again, George!
I do not believe that there could be any better mounting
system than yours! Several years ago (about 8, I think) I installed yuour
mounts o my Model 70 with a Leupold 2x7 scope and haven't had to touch a thing
since. I have nothing but the highest praise for these mounts.
Am considering changing to one of the new Leupold 3.5-10x50
scopes. ... Could you please advise what ring height I would need to order to
install this scope.
Will appreciate your help very much, since I would not even
consider using any other mounts.
G'day once more, Conetrol!
I first just wanted to say I love your mounts; been an absolute beaut
on my T-Bolt and I'm happy to recommend them to any who'll listen!
The reason I'm getting in contact again is because I'd like to order
another set of rings and bases. Exactly the same as last time as I'm planning to set
up another T-Bolt exactly the same as my current one and the rifles are virtually
identical in regards to the drilled and tapped receiver.
I guess you should have the details from last time but here are my
order details just to be sure: [ed.note: Custum base and rings specified for
T-Bolt and Zeiss 3-9x40.]
Abour thirty years ago I bought a set of your rings, then
things got tight and I had to sell the rifle.
Now I'm starting to build another rifle and yours are the
only rings and mounts I will use.
Please send me a catalog with current prices.
I have been a client of yours since getting out of high
school in the early eighty's.
After reading about your product in a gun magazine, I
purchased a base and rings. After many years of hard use, I am happy to say my
scope has never lost zero. And many drops and spills later I attribute it to
the Conetrol products.
I have had many friends over the years who use a lesser
product, and who are not as tough on their equipment as I, who cannot make that
claim.
So after adding on to my hunting collection I again ask to
purchase your product.
I have two F.N. Safari rifles, one 30-06, another in
375H&H. Please send two sets of two piece (Huntur mounts).
Thanks for info on tightening down the rings for the K-14 ...
I cranked them down quite snug and they did not budge at all
I took the allen wrench with me today when I sighted it in
and didn't have to touch it. .... What is unbelievable is even after I took the
rings out of the mounts and slid them up a bit from the variable dial, the
rifle was still absolutely right on when I took it to the range.
Great mounts and rings. Thanks for the advice and a good
product.
I currently have 16 various rifles with Conetrol scope
mounts. In fact, I don't recall a rifle without yours.
I previously purchased mounts and rings from rhe late Vern
O'Brien. I happen to own (an O'Brien gun) like the one in your large ad except
it has no inlay, just basket weave (checkering).
Thanks for the expedient service. The rings and bases are
always consistent and of outstanding qality. Thanks again
I received the rings and bases on Saturday, so please ignore the
previous e-mail. Thank you very much.
By the way, they are the finest mounts I have ever seen!!!
I bought a Conetrol Custum mount for my Dumolin 300 Win. Mag
12 years ago. I am still using it with great satisfaction. I never need to zero
my rifle again even after (much) abuse in Asian mountains and even boar hunting
in heavy bush. Incredible work. Thanks.
A friend of mine just bought a Weatherby Mark 5 in 257 Wea.
Mag. It has one of those European detachable mounts on (it). As usuall it is
untrustable for any kind of decent shooting. My friend asked me to buy a set of
Conetrol Custum mounts and 30mm Custum rings rings, preferably of medium height
suitable for Mark V and Swarovski 6x24. That is the story of this order.
I would be most grateful if you would send me your latest
catalogue ad price list of scope mounts. .... I am particularly interested in
mounts ... to suit the Mauser 98 and BRNO 22 cal. rimfire rifles (3/8"
dovetail).
I have several rifles fitted with your mounts ... and they
are absolutely first class in all respects.
Today I received the mount screws I enquired about . I want
to thank you for you attention to this and praise you on both your quality
product and your outstanding service.
In 1973 I was just out of the Army and going to school. I was short
on cash seven days a week. Still, I knew the axiom: you get what you pay for.
I had noticed Conetrol rings and bases on Weatherby rifles, so I assumed
they could take a kick.
I had a well-known Seattle gunsmith (Jim Coward) install them on my
Husqvarna action and install a Douglas air gauge barreL and of course a Timney trigger.
I put the action in a Brown precision; I did all the work on the stock.
The rifle was in Rem. 7mm mag. The gun still shoots 3/4".
More importantly, the same 3/4" for almost forty years.
Thanks for the very best fastener known to rifle shooting.
[ed.note: Mike advises that his son, Richard, shooting the rifle OFF HAND
at four hundred yards, hit 8 X 10 steel plates four out of five times!]
Over 20 years ago i bought a new Colt Sauer rifle in 30-06.
It was by far the finest rifle i had ever bought up to that time. Still is....
the action is silk smooth and the bluing is the same as on a Colt Python which
is to say exceptional. I bought a Zeiss 3-9x36 T-star scope to go with it. I
wanted something different and since i loved the rifle so much i wanted
something that would look nice. So i bought my first set of Conetrol rings and
bases for it. I saw them in an article about them in Gun Digest. I bought them
for beauty and something different. What I didn't know when i bought them was
how well they worked... I see there are other similar things now, but I've
loved the look of my rifle ever since I bought them. Some people say they are a
little on the pricey side, but they are a quality above most rings and bases.
I've never taken the scope off and have fired some good stiff
loads through it. I zeroed it in for my favorite load and I have to tell ya...
the scope is still as zeroed as when i started. They're beautiful, work great,
and I think were worth every penny I paid for them. Over the years I've now
gotten rid of a lot of my guns. but I kept what was the best that I had. Two
have Conetrol mounts and rings on them. I still have the Colt Sauer with the
Zeiss. I kept a Kimber of Oregon BGR Super America with a Swarovski, and my
Browning Golden Clays trap gun.
I would recommend (Conetrol) mounts to anyone."
I'm a small country dealer and don't have a website to
establish my bonefides. but I'm happy to pay retail as (Conetrol) is a
fabulous product.
We have dealt in the past but my current credit card details
are as follows.....
I have been seeing your ads since I was a kid (I am almost 56
now). A few years ago I ordered a custom rifle from Matt at Hill Country Rifle
in New Braunfels, TX, It is a wilddcat caliber, a .308 necked down to a .257
cal.
To make a long story short, I ordered a Zeiss 4.5-14 scope
and specified Conetrol rings and bases. The barrel, action, bases and rings are
finished in black teflon. The entire setup is beautiful to look at: sleek and
very custom-looking.
Performance-wise, I couldn't be happier. The mount is rock-solid,
allowing me to shoot single-hole groups at 200 yards.
Thanks for making a fabulous product.
My son has recently purchased a Remington Model 700 Police
Heavy Barreled Rifle and I told him he should get a set of your rings &
mounts.
I have used your mounts and think they are excellent. ....
They compliment the appearance of any fine rifle, they are etremely sturdy and
when in the field or on the range they do draw notice from the 'cookie-cutter'
crowd.
Would you please send me a brochure with your phone number,
and also price and delivery for matte finished rings and bridge mount for a
1" scope with a 40-44 mm objective.
I almost had this rifle rebarreled because the original
mounts were off so far. Remounted the scope (with Conetrol
base and rings).
Two shots -- to dial it in. This was the next
three shots. [ed.note: Mr. Holt's letter, received by postmail, was written on back of
paper target showing 1/2" group.]
Again, thank you very much.
I have received my last order in good shape. Thank you again
for providing me with your rings and bases. I think that you have the best in
the business.
The order included the first set of straight (parallel)
dovetail .22 rimfire bases that I have ordered from you. I am again impressed
with your product, though I'm not sure whey I don't EXPECT this quality
regularly. You would think that over the years I would finally get the idea
that I should always expect you to provide me with the absolute best equipment
that is available.
Thanks again for wonderful products!
First -- let me complement you on a wonderful product. The
first & only set of your rings that I have used was a set of Custum rings
holding a Redfield 2x7 on a Mod.70 .375 H&H. Beautiful, and I never once
had a problem with them and many hundreds of rounds through the rifle!
Second -- do you make any of your rings in 30mm? Am
considering a scope with that tube diameter & would like to use your fine
rings.
I have just finished reading "The NRA Percent" in
the latest issue of The American Rifleman and wish to commend you on such a
fantastic idea!
As a member of The National Rifle Association and an F.F.L.
holder, I wanted to let you know that I will implement a 1% discount (in my gun
shop) on all items involving shooting or hunting immediately to NRA members.
I have had Conetrol mounts on a Custom 7mm Rem. Mag built by the late
Jay Moore (McAllen TX) since 1976. They have performed flawlessly and without a doubt are
the finest looking system available.
When I purchased a 2011 Winchester Super grade Model 70 recently from (a gun store)
in Houston I insisted on Conetrol mounts after the sales people wanted to sell me a lesser product.
My compliments on the fine product you have delivered for many years.
[ed.note: This comment just below was included in a survey response RW kindly sent us about the www.conetrol.com website.]
Bought a set of your mounts in 1983. Love them.
I THINK YOU MAKE THE BEST RINGS AND BASES THAT I HAVE EVER
SEEN.
I have several sets of Custum bases and rings I bought many,
many years ago, and they are still the best out there.
I have several rifles that have your bases and rings on them
and I am a firm believer in your product. I like the look of rings that don't
have all the extra bumps and things sticking off them. Plus when anyone that is
half interested in rifles and knows quality stuff when they see it, I always
get comments on your stuff on how good they look and where can they get them.
....
I thought I read at one time that you made bases that didn't
require any modifications to the (military Mauser) action other than drilling
and tapping. That is what I am looking for. I don't care if the clip guide had
been ground off or not. It doesn't effect my shooting in any way so I am
leaving the actions as they are. .....[Ed.note: Conetrol does make mounts
for most all military guns, with only drilling and tapping needed.]
My Sako's and Tikka have all been set up for scopes and this
is my first step into the building my own rifle thing. I look forward to any
information you can send me, and I hope to be buying several sets of rings and
bases real soon.
The rings and bases I received for my Tikka Model M-65 to
mount my Weatherby 3-9x44 Supreme are the best. They are a lot more stable than
the (propiertary manufacturer named) mounts I had on the rifle since I bought
it in Germany in 1987.
You make a top quality product that looks and works better
than anything else I have used or tried to date. Keep up the good work.
Last year I bought a set of rings & base for my A-Bolt
Stainless Stalker. They are the best I've ever used.
I'm thinking about pulling my (another manufacturer's mounts)
off my Weatherby and replacing them with Conetrol's. Can you send me some new
info. for ordering. Thanks.
Please send me your latest brochure. Thank you!
I've used your products in the past and there are NO finer at
ANY price.
Thank God somebody still cares about their products.
I started on your site looking for rings and bases and ended up hugging my 1 1/2 year old boy after reading the Sita page. Lucas calls his 3-year-old sister "Tissy." Thank you. [edit.note: See 'A Loved One Remembered' on the Menu Page].
I have a 1969 Browning Sako 243. I'd like the best you have to offer. I own a set of your rings and bases on a CZ .204 (and) I love them. Please provide me the pricing and part numbers for two-piece bases and the Custum rings in 30mm with a 40mm (objective) bell. High polish on each.
I thought at some time I'd seen that you offered engraved rings. Was I crazy? [edit.note: Conetrol has never made engraved rings in the standard Huntur, Gunnur and Custum lines. But certain horizontal-split rings -- described on Extra-High, Quik-Zero and AQD (Quick Detach) webpages -- are offered with engraving for 50% extra cost.]
Thanks again.
Dear Sir,
My friend, KK - Dixon CA 95620, just wanted to let you know that your Conetrol mounts work great!! Check out the awesome results!! [ed,note: Picture included shows dead whitetail deer with dovetailed Sako rifle laying on the carcass. Scope is mounted with Conetrol's Gunnur bases and rings. See DapTar Bases webpage on Conetrol.com website.]
I'm going to be ordering a set for my Savage 110 .270 real soon with a Redfield Revolution 3-9x40mm objective.
Was wondering if I could order a set of rings to Canada
directly from you. If not, any Canadian dealers?
Thanks
P.S. Love your rings!
I have always searched for the best when building a gun.
Currently three guns of mine stock your mounts and rings. Two rifles and one
shotgun (for deer hunting).
Each is used year after year without worry of loss of
adustment. Thanks for the best!
On Saturday I installed your bases and rings (Gunnur base with Huntur rings on a Herter U-9) and must tell you that they are an engineering marvel. I have no idea how you came up with the design for the split rings but they are a design masterpiece!
[ed.note: The three paragraphs just below were in a follow-up email received a few weeks later, after Tom had utilized the windage adjustments of his Conetrol mount to enable centering the reticle in his Nikon Prostaff 3-9x40 scope.]
Yesterday I decided I needed a little "play" time and spent a couple of hours at the range. I adjusted the mounts as you suggested and the results were perfect.
The bases and rings are rock solid! I shot 5 1-inch groups at 100 yards, and 5 groups at 200 yards that averaged 2 1/4 inches.
Feel free to use this information as you see fit.
[ed.note: In conversation with Conetrol, EK expressed great
enthusiasm for Conetrol mounting -- going so far as to say he once told a
friend that if the friend bought a Conetrol mount and wasn't satisfied with it
he would personally refund his friend's money! Conetrol reacted graciously to
this extraordinary gesture but advised our much appreciated customer that
making any refund to a buyer must remain a burden for Conetrol to bear.]
Just a note to let you know that I have at least 6 sets of
your mts. installed on my most serious big-game rifles. They are the ONLY scope
mts. that I have used that can lock a scope on a heavy recoiling hunting rifle
to eliminate movement under heavy recoil.
Conetrol are the only scope mounts on my rifle during pack
trips in the mountains for elk.
[ed.note: This is a second letter received from JK of St. Joseph MI about two
years later, speaking of a problem with another mount product]: I have a Rem.
.308 caliber Varmint Special that I use for silhouette shooting, and am having
a problem keeping the scope from moving forward under extended firing
conditions. The scope is a Bausch & Lomb 6-24x40 and it is mounted in
(manufacturer named) rings and ... base.
After the scope pounded its way forward in the rear ring to
the radius on the scope just ahead of the power select ring, the entire ring
started to pound its way forward in the windage screws!
I have many sets of your rings and bases on much heavier
hunting rifles and I believe they are the best in the WORLD! I can truthfully
say that I have never had a scope move under recoil when installed in your
mounts.
[In this second letter, JK ordered a Conetrol Gunnur
two-piece base and rings for his Remington 700].
I have your fine Conetrol bases and rings on my Weatherbys
and Kleinguenthers and they are the only bases and rings I would consider for
any of my rifles.
Good People,
Please provide your current brochure. I am using Conetrol
mounts now and admire the looks & strength.
Products and service were excellent and much appreciated.
Before I get to the business part of this letter I have to
take a few lines to praise your product. I have used several types of mounts
and rings in the past but the Conetrol set I purchased last month are the best
I have used.
[I will admit that mounting the scope in the rings is
different but once I got the hang of it I found it's a snap. They mount lower
than any other rings and the craftsmanship is superb. The finish matches my
matte finished scope and adds what I think is the touch which makes the
rifle/scope combo look like a million bucks. Nice job!
Now, on to business. I would like to purchase two additional
sets of rings and bases......
6 years ago I ordered and installed a (Custum) set of DapTar
(mounts) on my Sako .223 Varmint and have never been more satisfied with a
product. Your mounts work great and are beautiful too.
Thanks for makinng such a high quality product. I am looking
forward to using your mounts (just ordered) on my new Kimber.
Just want to let you know that I received all the bases and rings today. [ed.note: The items ordered were two Custum DapTar bases for rimfire Tip-Off grooved receivers and six Gunnur 1" rings].
They are very nice. The best.
Thank you.
I must say that the mounts and rings I used on two M70
Winchesters gave and still give perfect satisfaction. One was a 375 H&H
used here in Alaska as well as Africa and the other a 458 Win Mag used in
Africa.
I have purchased one of the new Rugers in 416 Rigby and plan
to install a Leupold 1.5x5 on it. I prefer to mount the scope as low as is
practical so please advise me of the appropriate rings.
Totally satisfied with everything purchased over the past 30 or so years.
I've just purchased a new Winchester Classic Model 70 and
would like information on your bases and rings for this gun.
I have used your bases and rings on other guns in the past
and have been very pleased with their looks and easy installation.
Gentlemen,
I am writing just to let you know I am extremely pleased with
the 30mm rings and mounts for my BSA rifle. They look right, feel right and
shoot right. I will mention your products to anyone who wants my opinion.
I am very satisfied with my ... Conetrol mounts since 15
years for the first one. Thanks from a French customer.
(Custum setup ordered for Sako medium action and Leupold 3-9
scope.)
Just recently I purchased from you a set of Gunnur bases and
rings for a round top Sako. I am so pleased with them that I just had to go one
step up to the Custum.
They are the best-looking rings and bases I have ever seen or
used.
Comments: My "old" Conetrol bases and rings are
still in prime shape. Even after many years of sheep and goat hunting.
I may have "re-zeroed" this rifle once, due to a
fall.
Other than that, my Conetrol mounts have given me ZERO
problems.
I wanted to drop you a note to thank you for your very prompt
attention to my order for rings and bases for my Kimber Model 89 rifle.
I had a problem mounting my 2.5-8 Leupold ... on this rifle
using the Kimber rings which came with the rifle. They would not accommodate
the short length of the scope tube. By reversing your bases as you suggested
the scope is now mounted perfectly.
I was going over old correspondence and noticed we have been
doing business since 1976 and this last order was the eleventh rings and bases
over that period. Needless to say every order met with very complete
satisfaction. You are the best.
The Conetrol mounts that I bought 20 years ago have never
been off the rifle and the scope has never lost its zero. That's the kind of
quality I like. I have some (two manufacturers named) mounts but don't like
them as good as yours.
Your products are the Very Best. I have 7 sets.
[ed.note: In letter requesting new Conetrol literature] Now for a small
amount of bragging on your products. I use only Conetrol or (another mount
manfacturer named) on my rifles, depending on availability at the time. .....
I recently built a .243 cal. varmint rifle consisting of a
semi-heavy Douglas Premium 1-12 twist barrel, Winchester M70 short action,
Canjar trigger, glass-bedded in M70 F/W stock, with new but discontinued Weaver
12x scope, with (the other mount manufacturer named) mounts. ..... Groups ran
3/4" at 100 yards -- no better, period.
Replaced (the other mount manufacturer's) mounts with
Conetrol 2-pc. -- no other change. Now groups are 1/2" at 100 yards. All
groups are 10-shot strings.
Thanks again for your super products.
I received the mounts and rings (for a Savage 114) 3 days after
I ordered them. They are a work of art and I am pleased.
----------
I bought a Remington 700 classic in 6mm Rem 25 years ago from a crazy
old man who was gun nuts when I was 19 years old. I remember how all his guns
had Conetrol mounts and rings. I never forgot how the bluing shined on the polished rings.
Most people at work think I'm nuts spending almost $200.00 on rings and
mounts when you can get a set made in China, made by 9 year old children for $35 at (a famous
chain of discount stores named). They just don't understand the appreciation for a well made
quality American product, I guess.
Anyway, thank you for your service and your fine products.
I really like your mounts and not only find them attractive,
but also very strong. In the future I would love to continue using them. With
this i mind, please send me a brochure featuring your products.
Your scope bases ad scope rings are what I have been looking
for a long time.
Thank you for the prompt service on the mounts & rings I
ordered from you.
The rings and mounts are the best (I've) ever seen. They
really set my 25-06 Enfield off. I've gone out and shot the rifle twice now and
it groups perfect.
I purchased your mounts around 6 years ago and I love them!
They are beautiful and they work!
I have since added several guns to my collection and would
like to see your mounts on them too. I am looking for mounts for a Browning
A-Bolt .22, a Weatherby Classic in .338 Win. Mag. and Harrrington &
Richardson in 30-06. If you make mounts for any of these, could you please send
send me a brochure & price list.
Hi. I would like to know if you can make fluted bases,
with a front reverse, for a Kimber 8400 (long action), in a polished blue. The
factory mounts place the rings much too far apart for the scope I would like to
mount.
[ed.note: Conetrol does make ring-extending bases for the Kimber 8400, as well as for virtually
all other guns. See fifth paragraph of General Information webpage for more information on these bases.]
Your products are fabulous. Thanks.
I put a set of yor fine Custum ring and 2-piece bases on my
.340 Weatherby back in 1980. After three years of hunting, rifle hasn't lost
zero.
Many thanks for fine products and service.
You people make the best, and best looking, mounts in the
world!
Is it possible to get more information on your handgun
mounts?
I am based in South Africa and have 3 Conetrol Custum Bases
and Rings in service, my only product choice, thanks to a custom gun article by
Bob Milek which I read in Guns & Ammo in the mid-eighties!
Here is the information you requested I send to you in our
conversation today. .... I really have enjoyed your product in the past . There
are not too many manufacturers that pay such fine attention to detail as
Conetrol does. Thanks for such a fine product.
Thank you for the fast shipment, product and customer
service quality. Could not be any better!
I have been using your mounts for several years now, on both
my own and my customers' rifles and could not be more satisfied with them.
I never cease to be impressed by the superb quality of your
machine work -- the joins in the rings are so well made that they look like one
piece of metal.
It is nice to find a true craftsman still working today. I am
afraid that in this country they are few and far between.
About 9 months ago I bought a set of "Custum" bases
and rings for a Tikka LSA-55 action. These (I've) found to be excellent bases
and I cannot emphasize too much just how pleased I am with them.
I want now to purchase a set of "Huntur" bases and
rings for a BRNO ZKK-600 rifle.....
I have had your (mounts) on my first Weatherby some 20 years
now and am still pleased. Thanks.
I have the conetrol rings and mounts on 2 custom rifles and love them.
I have recently purchased a model 629 Smith and Wesson model 629
performance center in 44 magnum and it has picatinny rails installed. Does Conetrol have rings
for this sort of mount, and also stainless? [ed.note: Conetrol has DapTar Bases, which
webpage see, in all three of its standard lines for Picatinny rails as well as Weaver-type bases, but
DapTar Bases are not available in stainless steel.]
I have been using Conetrol rings & bases for twenty years & have never had a problem. They are on all my custom rifles.
I have acquired a custom rifle built on a Remington 700 action for a 308.
Please let me know if you have a Fluted Base .... blued with a matte finish with blued grub (cone) screws. Also, do you have Fluted Bases (for the) Kimber 84m (.243)? [ed.note: The answer to the questions is yes. Conetrol keeps in stock Fluted Bases -- which webpage see -- for both the 700 Remington and the Kimber 84M, and Fluted Bases for all guns are finished matte and come with blued cone screws.]
Could you please let me know the price & postage to Australia. When I receive your email I will telephone the credit card details.
I am from England, and would like to order a set of Conetrol
mounts from you guys.
The scope is a Leopold VXIII 4.5 - 14 x 50 mm. Scope tube is
30mm. The rifle the scope is to fit is an Anschutz Model 1710 DHB Bolt Action
.22 Rimfire.
Mounts required are 30mm Custum rings and Custum Daptar
bases.
This will be the third set of Conetrol mounts that I have
ordered from you guys for my three rifles and I think they're great!
I just received and installed my Cusutm mounts and rings for
my Savage 99. I am absolutely delighted with the result. I never before
realized how "clunky" my prior mounts were. The previous mounts were
by (manufacturer named) and consisted of a bridge base and rings. Although
(same manufacturer named) makes a quality steel mount system, after comparing
it side by side to the Conetrol product I have to conclude that yours is the
much superior product.
You also offer two piece bases for the Savage 99, something
that (same other manufacturer named) does not and I was very glad that you did.
In cold weather the restricted access provided by one piece bridge mounts makes
for slow and tricky loading and unloading of the Model 99. With my Conetrol two
piece bases I finally have the unimpeded action access that had eluded me in
the past. Loading and unloading operations are now MUCH easier! Many thanks for
continuing to offer two piece bases even for a discontinued (but wonderful)
model like the Savage 99. I personally like the appearance of one piece bridge
mounts, but when it comes to safety and convenience the two piece base design
on the 99 makes great sense.
For sheer elegance and solid steel dependability the Conetrol
system has no equal. Thank you also for your very prompt return phone call
concerning these mounts as well as your expeditious processing of my order.
Thank you for processing my last order so quickly. The
rings/bases look great on my Weatherby.
Sorry for shorting you $3. Please find the money enclosed. I
appreciate your sending me the goods without waiting for this balance. That was
a "class act."
Thanks again!
I would like to congratulate you on a wonderful product.
I am writing to you for some information on your scope
mounts. I have a rifle with your scope mounts on that hasn't needed any
adjustment for approximately 15 years -- and I am well pleased, needless to
say.
I would like to purchase another set of scope rings &
mounts for a .243 Win. Savage Model 99E.
I'm in the process of purchasing a new Browning Mountain TI
7mm-08. This is a stainless rifle and I would like to mount a Leupold VX-7 2.5-10x45mm
scope that has a 30mm tube and is in a satin gray finish.
What mounts and bases would you recommend? I do like the
Fluted Bases if available also.
I do not want to cut corners for price on this gun. I want it
to look like I envision it.
Thanks for your great products over the years.
Thank you for your prompt service on the set of mounts I
ordered by telephone. We encourage our cstomers to use this mount both for its
beauty and durability.
I personally have it on five of my best rifles.
I have just purchased a Weatherby Vanguard 30'06 rifle for
fall deer hunting in the Texas hill country so l'm very anxious to get the
finest mounts for my new 2-7x42mm scope, for this fine rifle.
For your information, I have used your mounts on my other
rifles for nearly 20 years, so I would use no others.
I have used your mounts on Contender pistols (and 541-S
Remington and Ruger pistols).
I have found your mounts to work well (and) by far are the
best looking mounts that I know of.
Thank you for a high quality product.
Check enclosed for 2-pc. Custum base set for 700 Remington.
I have used Conetrol mounts exclusively for over 30 years --
the best there is!
Could you please send me more information regarding your
product and its availability? I have just purchased two brand new Weatherby
rifles and would be very interested in the best scope mounts money can buy.
I am writing you in regard to your products. They are well
made, and are the strongest I have ever seen.
A customer asked me to sight in his gun for him at 150 yards.
..... (After doing so) I could put a bullet in a half dollar at that range
every time.
I have a 7mm Mag Sako Finnbear and am having a hard time
finding base and rings for a Leupold scope. They may have discontinued that
type of base and rings.
I had a set of your rings years ago on a 1 of 1,000 Sako and
loved them...Any suggestions??
Hi. I have your rings and mounts on my 7mm Weatherby mag and
they have performed flawlessly for 25 years, with lots of miles on a horse and rugged mountain hunting.
Never has lost it's zero.
The mounting system is "Beautiful." The
best I've ever seen!
[ed.note: Comment of customer writing to order mounting for Weatherby Mark V magnum and Leupold 6-18x40 scope.]....
I have several of your mounts on other rifles, and they are, without a doubt, the most beautiful and best mounts available.
I have a new Winchester Model 70 Supergrade in 300 WSM and a Burris 2.5-10x50
Euro Diamond Scope (30 mm). I (want a) 2 piece Custum base and Gunnur rings. Please advise ring
height. Links for Burris scope (dimensions) are below.
I love your mounts, first purchased in 1979.
Thanks.
First, I would like to compliment you and all persons
concerned for the splendid job of of thinking up and making such a mount for
the Ruger #1 Single Shot with rib.
The way the attaching of the bases (the base segments of a
DapTar two-piece base) is achieved is truly unique and excellent!
I could not have been more surprised and favorably impressed.
The customer for whom I bought them was amazed too!
Just wanted to say thanks for your wonderful service and great products. I placed my order (for a Gunnur base and Huntur rings for a Kimber) by phone Friday afternoon after talking with you. I figured about a week to get my mounts. Wrong! They were in my mailbox the morning of Tuesday 10/26. That's two days not counting the weekend and was shipped regular mail. I don't think you can drive from Seguin TX to South Carolina in two days. Were they the correct mounts? Yep. They are exactly what I was looking for. They look like they grew on the rifle. I trusted you and you came through in spades.
When you call Conetrol you get a real live human being who's knowledgeable, courteous, and friendly. You get a hand made product made in the USA that is very simply, the best. When you put a couple of thousand bucks in a rifle and scope and spend a lot more than that on a hunting trip, why would you use just any mounts? The slight extra cost is insignificant when you see the results.
Thank you for not compromising your quality and integrity. I wish other companies would take a lesson from you on how to run a business.
Please feel free to use this letter at your discretion
.... I would like you to know that through the years I have
used many brands of rings and bases, but today all my bases and rings on my
rifles are Conetrol --- I own fifteen sets of Custum rings and bases.
I got ... your beautiful scope mount for my FN .22 auto!
..... I just want to congratulate you for this great technical and best looking
mount.
By the way, first I thought to let it mount by my gunsmith
but out of curiosity and following to your user's manual, within the time of a
good beer, sitting in my comfortable chair in my living room, I mounted it
myself and it sits just perfect.
Just thought I had to tell you how enthusiastic I am about
it.
Dear Conetrol,
I would not ever consider using any other hardware to mount my scopes, your products are exceptional!
Will you please send me one of your free brochures that I saw
advertised in the "American Hunter." I personally have a pair of your
Conetrol rings on my hunting rifle and I have been pleased with their
ruggedness and low profile.
I have been using one of
your mounts, Custum base and Custum rings, on my main hunting rifle (Remingron
Classic 700 in 300 Weatherby) and have found it to be excellent. I really like
the sleek lines, good looks, and brutal strength. I have never had a problem
with any shifting, sliding, loosening, or any other common problems with lesser
mounts.
After numerous hunting trips to places from Ungava Bay,
Quebec, to Deer Lakes, New Foundland, to Virginia, those mounts never shifted.
It is always a good feelig to know that when you reach your destination your
rifle will still hit to the same point as you sighted it in at.
I am now investing in a stainless rifle to use in bad
weather, especially the rain and snow I always seem to run innto when I go away
on a trip. Based on the excellent service I have received from (your) product,
I would like to use another set on this new rifle.
I will be using these mounts on a new Winchester Model 70
Classic Stainless 300 Weatherby Magnum and a Nikon 3x9 matte scope. ..... I
would like a pair of Conetrol "Huntur" split rings and a two (2)
piece "Gunnur" base and I would like to upgrade to stainless cone
screws.
Order was fine. I am going to start pushing your mounts on my
custom rifles.
Thanks.
I would like to order (1 Gunnur base for the Sako AV and four
low Huntur rings).
By the way, these are the best scope mounts I have ever seen
or used. I have mounted a lot of scopes with (two mount manufacturers named)
and others, and I think yours are at least twice as good as any others I have
used. Thanks.
We are just getting started in this area, and for years I
have used only your mounts on my personal weapons. Please send me your current
catalog and price sheet as I intend to stick with your mounts for all scope
installation on customer weapons.
By the way, I had a set of your mounts on my Ruger 77, 7mm
Magnum, this past season in Montana that took being bounced off a horse, rolled
down a rock trail, and never lost their setting. Two days later a nice elk was
taken at 400+ yards, right on target.
Thanks for making such a beautiful, rugged mount.
I have had your system on my Sako 22-250 for around 18 maybe
20 years in West Australia in two piece and never a problem! Looks neat and
awesome to boot!
Thanks
EMAIL OR POSTMAIL RECEIVED FROM: SRS ---
Edwardsville IL 62025
I must write to tell you how pleased our customer is with the
Conetrol rings and bases he used to mount our Jena riflescopes to his firearms.
We assisted him in the mounting procedure and I was absolutely astounded to
note the very high quality of the intricate workmanship your mounting system
displayed.
While the 3-piece rings and the two depending-stud screws at
first appeared like they would present a formidable task to assemble, it was
actually very easy and presented no problem at all. Thank you for a very fine
product, one which we will begin to recommend to or customers.
90790 ~ EMAIL OR POSTMAIL RECEIVED
FROM: BT --- Moriah Center NY 12961
[ed.note: From email sent with order]: Already have a set of your fine
split rings ready to go on 1.75 x 6 Leupold varix III matte.
Thanks for decades of a great looking and solid well
engineered product.
78801 ~ EMAIL OR POSTMAIL RECEIVED
FROM: JRT --- Plant City FL 33563-3836
I am a millwright (and) truly appreciate the design of the
original Conetrol mounts.
The mounts match the high luster blue of the gun perfectly.
... The smooth ... low profile is great looking.
I am going to convert all my rifles over to your mounts and
rings. Wish I had run across these sooner.
60590 ~ EMAIL OR POSTMAIL RECEIVED FROM:
PT --- Anchorage AK 99516
Per our phone conversation I am returning the front stainlss steel
Custum mount for my Remington 700 and am requesting that you exchange it for the
ring-extending stainless steel Custum (front base segment). I seem to
be crouching up on the scope and would like to slide it back a bit.
Your mounts and rings are great!
Thank you for your time and consideration.
EMAIL OR POSTMAIL RECEIVED FROM: RT ---
Nekoosa WI 54457
Out of all the scope mounts on the market, I find Conetrols
to be the most well designed & good looking for a gun to make it beautiful.
EMAIL OR POSTMAIL RECEIVED FROM: ST
Subject: Happy Customer here.
Just had to write. I have a 20 + year old Sako 30-06 / A5
L61R. Was thinking about buying another gun but really liked my old Sako. I
have about 10 guns, but this is my old reliable if you know what I mean. I
bought the gun new in 1987.
I decided to re-scope. Put a Leopold VX-L 3.5x10x50 on with
your Conetrol low rings and it fit like a custom job. Scope is actually lower
then my old 3X9x40 scope was and I can see well into dusk. My buddies are now
thinking of doing the same scope ring upgrade.
Your product definitely exceeded my expectations. I will take
a photo of the setup and send it to you when I can. Thank you.
EMAIL OR POSTMAIL RECEIVED FROM: ST ---
Spokane WA
I’m trying to find base and rings for a Ruger No. 3 and a
Burris 2 to 7 Short mag scope. It has Weaver bases, number 85 and 86 and they
don’t look level, with the bore, I hope that you can help. I’ve used Conetrol
rings and mounts before and they are the best. Thanks.
EMAIL OR POSTMAIL RECEIVED FROM: Stephen
I. Turner --- Belfair WA 98528
I spent 26 years in the US NAvy working my way up from
enlisted to being a Chief Warrant Officer. When I finally retired my wife knew
that a good retirement present would be a new rifle. She said pick out any one
you want. I finally found a Win Model 70 Super grade in 300 Win mag. She also
got me a nice 3x9 Leupold scope.
While looking for scope mounts I came across CONETROL and
bought them for my rifle. They are simply the best mount I have ever had.
Now this past Xmas she give me another Model 70. This one is
a featherweight 270. So I am back looking for mounts. I already have a 3x9
Leupold waiting to be put on. So when I save up the cash I will be placing
another order.
The other thing I saw on your site was the section on
"A Loved One Remembered." It touched my soul; only a man that has
loved his wife so much could write such a fitting tribute. My wife and I had
never had children and over my Navy carceer I left her at home way too many
times.
EMAIL OR POSTMAIL RECEIVED FROM: LU ---
Adelaide, SOUTH AUSTRALIA
Many thanks for the scope mount screws and the Allen key you
sent me, and very quick too. You offer a great service.
The next scope mounts I will order direct from you.
Again, many thanks for the excellent service, and the great
product.
50501 ~ EMAIL OR POSTMAIL RECEIVED
FROM: Mark Urmanski MD --- Olympia WA 98506
(I need) a base for the Win.M61 .22 rifle (and) 1" low
rngs -- Huntur finish. Included is a (walnut template) showing the curve of the
top of the receiver.
I plan to use a 2x7 compact Leupold but wll adapt if
necessary.
I have several Conetrol mounts on my rifles and really
apprecate your fine work.
18499 ~ EMAIL OR POSTMAIL RECEIVED FROM:
BAV --- Inglewood, WA 6052, AUSTRALIA
Hello George,
By far the best mounts I have ever used. " Par Excellent "
Thank you once again.
Cheers.
EMAIL OR POSTMAIL RECEIVED FROM: RV ---
Noxen PA 18636
The (mounts) I got off you years ago are still working great.
.... The way (they) held up for me all these years -- they surely are the best!
Thank you for such a good product.
EMAIL OR POSTMAIL RECEIVED FROM: SLV ---
CANADA H4K 1Z2
I am using your scope mounts on two of my rifles and and (am)
extremely happy with both.
Now I bought a new .257 Roberts Ruger rifle and would like to
put on your scope mount again. Also, I would like to replace the base on a 7mm
Rem. Mag. H&R Ultra Rifle.
Please send your (catalog and price list).
98490 ~ EMAIL OR POSTMAIL RECEIVED
FROM: BW --- Mishawaka IN 46544
George...you are a real straight shooter and you have the
best product and service in the industry. When I pull my Model 70 Super Grades
and Mark Vs out of my trunk at a range or camp, they all have Custum rings and
bases...every man there knows that a person using Conetrols is a real insider...old
school quality that will outlive us all.
My hat is off to you. I have around 25+ sets of Custum rings
and bases, plus a couple Gunnurs (bases) for matte finished working guns. Irks
me to own a rifle without Conetrol mounts...even put them on my new Kimber 8400
Classic.
Talk soon ---
70790 ~ EMAIL OR POSTMAIL RECEIVED FROM:
DW --- Broadwiew Heights OH 44147
Please send your color brochure. I am interested in your 'Quick-Detach' [ed.note: AQD] mounts.
I now have two rifles with your projectionless split rings. I think they are the best mounts made.
Thank you.
EMAIL OR POSTMAIL RECEIVED FROM: JW ---
Uvalde TX 78801
Enclosed is my check to cover state sales tax and hopefully
2 of the small (stud) screws that hold the (Custum ring) halves together. The scope I
am mounting on my long action Model 700 Remington is a Leupold 6.5x20 w/
adustable obective.
Thank you again for your beautiful product.
49090 ~ EMAIL OR POSTMAIL RECEIVED FROM:
PW -- Queensland AUSTRALIA 4113
I thought you’d like to hear that I recently returned to my home in Australia from a 6 day hunt in New Zealand for Tahr and Chamois. The rifle I chose for this hunt was a Winchester pre-64 Model 70 Featherweight in .270 Win., fitted with Conetrol Custum two piece mounts and a Leupold 4-12X40 scope. This combination was chosen for it’s ability to anchor these animals whilst be of light weight required for the mountain hunt.
Your mounts performed brilliantly in some very adverse alpine conditions. The strength, yet light weight, of your Custum mounts held the scope firmly on zero whilst sustaining several knocks brought about by walking (and stumbling) in heavy snow.
The trophy Chamois (pic below) was taken at an altitude of around 5,500 feet at a range estimated to be 200 yards. A single shot with a Hornady 140-gr. Interlock bullet and the trophy was anchored.
My guide commented on your Custum model scope mounts which I have on pretty well all my rifles. Well done and keep up the good work.
909311 ~ EMAIL OR POSTMAIL RECEIVED FROM:
VJW --- Kodiak AK 99615
I offer my condolences on the passing of your wife. [ed.note: See "A Loved One Remembered" on Menu Page.] At the end, all who have any awareness realize the many ways in which they could have shown more love to those who have passed before them. That awareness hurts you now, but it probably means that you showed her more love and happiness while she was here than she might have received from another. None of us is a master of love and all of us have something to learn about it. Your message touched me and has made me resolve to be a more loving husband.
[edit.note: VJW's faxed message above was much appreciated and touched me no less than my tribute to beautiful Esther Mae touched him. He opines I probably gave her more love and happiness than another lifemate might have and resolves to be a more loving husband himself. I was flattered and think I cannot but go with that. ..... George Miller.]
[edit.note: With VJW's faxed message was his order for a Model 70 Custum base and Custum rings in stainless steel.]
19501 ~ EMAIL OR POSTMAIL RECEIVED
FROM: WJW --- Omaha NE 68112
I received the (Extra-High Rings) from you, and they work
great. Clearance between the scope eyepiece and the bolt handle lift is
approximately 1/8". Will forward a picture to you later this week.
I have to say the projectionless rings possess greater beauty
on the arm, and If you do come up with a higher lift projectionless ring let me know.
You have a great product and I will be passing that word at
the range. Thank you for all of your kind assistance in my endeavor, it has
been great meeting you, and I will definitely use Conetrol in any future scope
mountings. I'm presently dealing on another model 70 in 22 hornet........
EMAIL OR POSTMAIL RECEIVED FROM: Gerard
J. Wolski
[ed.note: Letter received with order for Custum base and rings for BAR
.338 rifle]: After using other rings and bases I could not get my BAR .338
Win.Mag. to group. A friend let me use his Conetrol Rings and Bases on my
rifle. What a difference they made, and I'm hooked on them now.
Thank you for such a great product. I will be using them from
now on, on all my rifles.
P.S. You may reprint this and use it in your advertising with
my permission. Thank you again, Sirs.
EMAIL OR POSTMAIL RECEIVED FROM: JY ---
Houlton ME 04730
Hello again.
In the fall of 2007 I purchased from you a mounting system
for my Sako Deluxe.
Today, my friend asked me to find him “rings and mounts --
the best there is” for his new model 70 SuperGrade. Of course, the
first and only thing that came to mind was Conetrol…
He’s looking for high gloss blued mounts and rings, to match
the blued finish of his new rifle. In terms of optics, he intends to mount a
Leupold VX-3 (50 mm bell x 1”tube) and wants it as low as possible.
Please provide appropriate part numbers; cost and freight
amount to 04730 (Houlton, ME).
Thank you and best regards.
EMAIL OR POSTMAIL RECEIVED FROM: MHY ---
Santa Maria CA 93454
I just wanted to drop you a line to inform you that I am
extremely pleased with your AQD (Quick Detach) bases and rings. I recently put
a Nikon 30mm scope on my .375, and shot the enclosed group (ed.note: under half inch) on
Saturday. That is five rounds at 100 yards, utilizing my pet load of the
Hornady 300 gr. SBT with 76.0 gr. Winchester 760 powder.
As I was switching between the original Leupold scope and the
new Nikon, a neighboring shooter thought I was nuts to remove the scopes. After
I demonstrated that your design really does return to zero, he was sold!
EMAIL OR POSTMAIL RECEIVED FROM: CZ ---
Manchester CT 06040
Please send a set of (Huntur) 2-piece bases, 336H2 Marlin.
.... And thanks again for such a fine dependable product.
60290 ~ EMAIL OR POSTMAIL RECEIVED FROM:
JZ -- Westminster CO 80020
Thank you for making such a great product. I was really impressed
with the quality, the precision and the material you use.
|
|
